E-link چین شرکت فناوری، با مسئولیت محدود.
جزئیات محصول:
پرداخت:
|
Transmission Speed: | 10G | Fiber Connector: | SFP/LC |
---|---|---|---|
Protocols: | IEEE802.3an, IEEE802.3ae | Transmission distance: | Up to 80Km |
Ethernet Port: | Rj45 | Dimension: | 156 x 128 x 32 mm |
Keywords: | 10G Fiber Ethernet Media Converter | ||
برجسته: | fiber optic ethernet media converter,ethernet fiber media converter,ethernet fiber media converter |
Overview
The LNK-10G-MC Series is a 10 Gigabit Fiber Ethernet Media Converter. It offers conversion technology by providing one 10GBase-T RJ-45 port and one pluggable 10GBase-X fiber SFP+ port or XFP port. The open SFP+ or XFP port supports a wide variety of E-link 10GE SFP+ or XFP fiber modules, as well as third party MSA compatible SFP+ or XFP modules.
The LNK-10G-MC Series is a copper to fiber 10Gbps Ethernet media converter based on IEEE802.3an and IEEE802.3ae. With SNMP and Web-based management in the LNK600-R16, the Network administrator can monitor, configure and control the activity of each card in the chassis. This converter uses Cat.6a/Cat 7 twisted pair cable as copper transmission media with RJ-45 and 10G optical solution with SFP+ or XFP. The data stream can be converted bi-directionally from 10GBase-T to 10GBase-R and vice versa. With full duplex wire speed forwarding capability between these two media, The LNK-10G-MC brings you the best and simplest solution for the 10G Ethernet conversion between copper wire and fiber.
Technical Indexes
Module Card | SFP+ Module Card | XFP Module Card | |||
Type A | Type B | ||||
Interface | Port A | SFP+ | XFP | ||
Port B | RJ45 | RJ45 | |||
Transmission Speed | 10G | 10G | |||
Data | Technical Indexes | ||||
Protocols | IEEE802.3an(10Gbase-T), IEEE802.3ae(10Gbase-SR/LR/ER/ZR) | Access Type | 10G LAN | ||
Transmission Distance | SFP+ module: Up to 80Km 10Gbase-T: 100meters Cat .6a cable |
||||
Maximum Packet Forwarding Rate | 14,880,950/S | ||||
Network management information |
• Card type information • SFP+ or XFP fiber module detection • SFP+ or XFP fiber module DMI function (Temperature, Voltage, Optical power) • Link status detector • Enable/Disabled Loopback test function • Enable/Disable PRBS Generator and checker function • Rate select (10Gbase-Lan or Wan) • Remote card's status monitor (only in pairs) |
||||
Power requirement | Rack-mountable : AC 85 ~ 220V OR DC -48V Standalone: AC 220V OR DC -48V Power consumption: ≤9W |
||||
Work Environment | Operating Temp: 0~ 50 ℃ Storage Temp: -10~ 70 ℃ Humidity: 5%~90% (non-condensing) |
||||
Dimension | Card :11.5mm(W)×78mm(D) Standalone :156mm(W)×128mm(D)×32mm(H) |
Features
Application
Connection between fiber to copper 10Gbps Ethernet equipment function as fiber-to-copper media converter for long distance transmission up to 160km
10G SFP+ Fiber Ethernet Media Converter with Build-in Power Supply.
تماس با شخص: Mr. Michael Guo
فکس: 86-755-8312-8674
قدرت Gigabit E-Link بیش از انژکتور انژکتور 12 ~ 48VDC ورودی برق DIN Rail / Wall Mount
پورت 60 ولت تنها بر روی دستگاه های اترنت پشتیبانی از Din Rail / Wall Mount Installation
10/100 / 1000Mbps انژکتور پر قدرت 100 وات 802.3bt 100m انتقال
48 Volt 2 Port Cisco POE Power Over Ethernet Injector 10 / 100 / 1000Mbps 15.4W
اکستندر نوری Mini 4K HDMI ورودی USB چند حالته غیرفشرده 300M
4K SFP LC 80km HDMI فیبر Extender 10.3Gbps تک حالت فیبر Extender
SFP 5VDC HDMI روی فیبر نوری درگاه میکرو 4K USB 80 کیلومتر
4K*2K HDCP 10.3Gbps HDMI Fiber Extender SFP LC با صدای خارجی
توسعه دهنده Mini 3G / HD-SDI به فیبر مبدل با عملکرد Tally یا RS485 Data
3G-SDI SDI To Fiber Optic Converter Extender over Fiber 20KM Long Transmission
HD SDI To Fiber Optic Converter with Forward Audio
Ethernet over Fiber Converter SD/HD/3G-SDI + RS485/RS422/RS232 Data + 10/100M